Using toner save mode:三星打印机类ML-3051N 用户手册 第21页

Changing the font setting Using toner save mode Your machine has preset the font for your region or country. If you want Toner save mode allows the printer to use less toner on each page. to change the font which you prefer or set the font under special Activating this mode extends the life of your toner cartridge and reduces condition such as the DOS environment, you can change the font setting your cost per page beyond what one would experience in the normal as follows: mode, but it reduces print quality. This setting is not available with the 1200 dpi setting. There are two ways to enable this mode: 1 Press Menu on the control panel until you see Emulation feature. 2 Press OK to access the font setting. Using the control panel button 3 Press the left/right arrow until Setup displays. Press Toner Save on the control panel. The printer must be in Standby mode; the Status LED lights green and Ready is shown on the display, if 4 Press the left/right arrow until PCL displays. you use the ML-3051N or ML-3051ND. 5 Press the left/right arrow until Symbol displays. • If the button backlight is on, the mode is enabled and the printer uses less toner to print a page. 6 Press the left/right arrow until your preferred font displays. • If the button backlight is off, the mode is disabled and the printer prints 7 Press OK. in normal mode. 8 Press Stop to return to machine ready mode. From the software application Note You can set toner save mode from the printer properties window on your Following information shows the proper font list for printer driver. See the Software Section. corresponding languages. •Russian: CP866, Cyrillic •Hebrew: 15Q, 8H, 0H (Israel only) •Greek: GREEK, PC737 •Arabic & Farsi: ARABIC8, WINARABIC, PC864, FARSI, ISOARABIC. 2.7
Using toner save mode_三星打印机类ML-3051N 用户手册

2.7

<

System setup>

Changing the font setting

Your machine has preset the font for your region or country. If you want

to change the font which you prefer or set the font under special

condition such as the DOS environment, you can change the font setting

as follows:

1Press Menu on the control panel until you see Emulation feature.

2Press OK to access the font setting.

3Press the left/right arrow until Setup displays.

4Press the left/right arrow until PCL displays.

5Press the left/right arrow until Symbol displays.

6Press the left/right arrow until your preferred font displays.

7Press OK.

8Press Stop to return to machine ready mode.

Note

Following information shows the proper font list for

corresponding languages.

•Russian: CP866, Cyrillic

•Hebrew: 15Q, 8H, 0H (Israel only)

•Greek: GREEK, PC737

•Arabic

& Farsi: ARABIC8, WINARABIC, PC864, FARSI,

ISOARABIC.

Using toner save mode

Toner save mode allows the printer to use less toner on each page.

Activating this mode extends the life of your toner cartridge and reduces

your cost per page beyond what one would experience in the normal

mode, but it reduces print quality. This setting is not available with the

1200 dpi setting.

There are two ways to enable this mode:

Using the control panel button

Press Toner Save on the control panel. The printer must be in Standby

mode; the Status LED lights green and

Ready is shown on the display, if

you use the ML-3051N or ML-3051ND.

• If the button backlight is on, the mode is enabled and the printer uses

less toner to print a page.

• If the button backlight is off, the mode is disabled and the printer prints

in normal mode.

From the software application

You can set toner save mode from the printer properties window on your

printer driver. See the Software Section.

/ 102页
此说明书适用于: 三星 ML_3051N   等型号。
匿名用户上传于:2014-09-18

(┯_┯)广告君被屏蔽了~~~

感谢您的支持,请按照如下步骤取消屏蔽ABBAO的广告(详细步骤):