Using manual feed mode:三星打印机类ML-3051N 用户手册 第34页

5 When you print a document, set the paper source and type in the 2 Squeeze the multi-purpose tray paper width guides and adjust software application. See the Software Section. them to the width of the paper. Do not force too much, or the paper will be bent, which will result in a paper jam or skew. For information about setting the paper source and type on the control panel, see page 2.3. 6 After printing, fold the multi-purpose tray extension and close the multi-purpose tray. Tips on using the multi-purpose tray • Load only one size of print media at a time in the multi-purpose tray. • To prevent paper jams, do not add paper when there is still paper in the multi-purpose tray. This also applies to other types of print media. • Print media should be loaded face up with the top edge going into the multi-purpose tray first and be placed in the center of the tray. • Always load only the print media specified in page 5.1 to avoid paper jams and print quality problems. • Flatten any curl on postcards, envelopes, and labels before loading 3 When you print a document, set the paper source to Manual Feed them into the multi-purpose tray. and select the appropriate paper size and type in the software application. See the Software Section. • When you print on 76 mm x 127 mm (3 x 5 inches) sized media on the multi-purpose tray, open the rear cover for straight paper path to 4 Print a document. avoid paper jams. The display shows a message prompting you to load paper and • Make sure to open the rear cover when you print on transparencies. If press Stop (if you use the ML-3050) or OK (if you use the ML- not, they may tear while exiting the printer. 3051N or ML-3051ND). Using manual feed mode 5 Press Stop or OK. The printer picks up the print material and prints. After one page is You can manually load a sheet of print material in the multi-purpose tray printed, the message appears again. if you select Manual Feed in the Source option from the Paper tab when you change print settings to print a document. See the Software Note Section. Manually loading paper can be helpful when you want to check If you do not press the button, after a pause the printer will the print quality after each page is printed. automatically pick the print material. This loading procedure is almost the same as the procedure for loading in the multi-purpose tray, except you load paper sheet-by-sheet in the 6 Insert the next sheet into the multi-purpose tray and press Stop or tray, send print data to print the first page, and press Stop (if you use the OK. ML-3050) or OK (if you use the ML-3051N or ML-3051ND) on the control Repeat this step for every page to be printed. panel to print each following page. 1 Load the paper with the side to be printed on facing up. 5.7
Using manual feed mode_三星打印机类ML-3051N 用户手册
/ 102页
此说明书适用于: 三星 ML_3051N   等型号。
匿名用户上传于:2014-09-18

(┯_┯)广告君被屏蔽了~~~

感谢您的支持,请按照如下步骤取消屏蔽ABBAO的广告(详细步骤):