Understanding display messages:三星打印机类ML-3051N 用户手册 第48页

Understanding display messages Message Meaning Suggested solutions Messages appear on the Smart Panel program window or the control Main Motor Locked There is a problem Open and then close panel display to indicate the printer’s status or errors. Refer to the tables in the main motor. the front cover. below to understand the messages’ meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical Open Heat Error There is a problem Unplug the power order. Cycle Power in the fuser unit. cord and plug it back in. If the problem Note persists, please call When you call for service, it is very convenient to tell the for service. service representative the display message. Over Heat Error There is a problem Unplug the power Cycle Power in the fuser unit. cord and plug it back Message Meaning Suggested solutions in. If the problem persists, please call Door Open The front cover or Close the cover until for service. rear cover is not it locks into place. securely latched. Paper Jam 0 Paper has jammed Clear the jam. See Duplex Jam 0 Paper has jammed Clear the jam. See Open/Close Door in the feeding area page 9.1 and Check Inside of the tray. page 9.1.during duplex page 9.4. printing. Paper Jam 1 Paper has jammed Clear the jam. See Duplex Jam 1 Open/ Paper has jammed Clear the jam. See Open/Close Door in the fuser area. page 9.3. Close Door during duplex page 9.5. printing. Paper Jam 2 Paper has jammed Clear the jam. See Check Inside in the paper exit page 9.3. Fuser Door Open The fuser door is Open the rear cover area. not securely latched. and close the fuser The printer is door until it locks into Printing... printing jobs using Complete your place. the displayed printing. For the location of language. the fuser door, see page 9.4. Ready The printer is on-line and ready to printer. Use your printer. Load Manually The multi-purpose Load a sheet of print Press Stop Key tray is empty in material and press Self Diagnostic... The engine in your Please wait a few manual feed mode. Stop. printer is checking minutes. some problems Low Heat Error There is a problem Unplug the power detected. Cycle Power in the fuser unit. cord and plug it back in. If the problem When data is persists, please call Sleeping... The printer is on received, it switches for service. power save mode. to on-line automatically. LSU Hsync Error A problem has Unplug the power Cycle Power occurred in the LSU cord and plug it back Tray 1 There is no paper in Load paper in the (Laser Scanning inches. If the Paper Empty the tray 1. tray 1. See page 5.5. Unit). problem persists, please call for Tray 2 There is no paper in Load paper in the service. Paper Empty the optional tray 2. optional tray 2. See page 5.5. LSU Motor Error A problem has Unplug the power Cycle Power occurred in the LSU cord and plug it back (Laser Scanning inches. If the Unit). problem persists, please call for service. 9.7
Understanding display messages_三星打印机类ML-3051N 用户手册
/ 102页
此说明书适用于: 三星 ML_3051N   等型号。
匿名用户上传于:2014-09-18

(┯_┯)广告君被屏蔽了~~~

感谢您的支持,请按照如下步骤取消屏蔽ABBAO的广告(详细步骤):